I was about to do a factory restore on my computer later in the day, but I was unlucky that the computer stopped working. When I turn it on it continuously beeps and won`t turn on, I have picked the option to Start Windows Normally and even the option that checks/diagnoses the files (to fix the problem not letting me start) but when it says Loading Files it starts beeping again and the process stops.
Someone, please help me with this?
Can it also be a problem with the RAM, but maybe that was for a different problem or so, but if it is a problem with the RAM, then how can I fix it?
You may try to reseat the ram. Remove the ram and re-insert.
Also, do a hard reset. Turn the computer off. Remove the power cable and the battery. Hold down the power button for 15 sec while booth power sources are removed.
This should reset the hardware in the computer.
As you turn it back on tap the F10 key. This will load the BIOS setup utility. Press F9 to load defaults. Press F10 to save and exit.
When the computer boots back up, check to see if everything is working.
It is indicating that the USB drivers or the hardware (ports) have an issue. I recommend you to try uninstalling the USB drivers and check if that solves the issue.
- Start Control Panel, click Hardware and Sound, and then click Device Manager.
- Expand the node that says
Universal Serial Bus Controllers, right-click on all the USB root hubs and click Uninstall. - On the
Confirm Device Removaldialog box, click OK to start the uninstall process. - When the uninstall process is complete, restart the PC and check if the issue happens.
